Home>IDRS Brand>Network IP Cameras>Indoor IP Cameras>

650/540/420TVL Standard definition IP dome camera

420/540/650TVL available
IR distance is 30m
Adopt SOC Hi3512 processor, highly integrated.
H.264 Main Profile video compression arithmetic, high compression ratio, high image quality, support dual code stream
Support D1 (4CIF) \2CIF\CIF\QCIF compression resolution
Can set image quality, code rate and frame rate.
1 channel alarm input, 1 channel alarm output.
Support SD card storage.

Features

420/540/650TVL available
IR distance is 30m
Adopt SOC Hi3512 processor, highly integrated.
H.264 Main Profile video compression arithmetic, high compression ratio, high image quality, support dual code stream
Support D1 (4CIF) \2CIF\CIF\QCIF compression resolution
Can set image quality, code rate and frame rate.
1 channel alarm input, 1 channel alarm output.
Support SD card storage.
Support video loss, motion detection (sensitivity and detection zone can be set) and sensor alarm function, alarm linkage PTZ preset.
Support OSD, LOGO, privacy mask and watermark function.
Support voice talk.
Can set up video signal brightness, contrast and chromacity.
Support ADSL (PPPoE) and DDNS.
Support HTTP, TCP/IP, UDP, SMTP, DDNS, DNS, SNTP, BOOTP, DHCP, FTP, SNMP, NTP, UPNP network protocol.
Auto adjust video frame rate according to network bandwidth, suitable for different network condition.
Support G.726, G.711, ADPCM audio compression
Built-in various PTZ protocol, support preset, cruise, tour setup and call.
Embedded Web Server, live view via IE browser.
Support mobile phone monitoring.
Multi-level user rights management.
Support remote update and maintain
Abnormal auto restoration and auto reconnection function when net disconnection.

Related software

IDRS-6000S PC Server Software (V8.33 and above)
IDRS-NVR Client Software (V8.33 and above)
IDRS NVMS
IE Browser (Web function)

Specifications

Models		IDRS-IPC4-0330D/SS-E	IDRS-IPC4-0330Q/SN-E	IDRS-IPC4-0330Q/SE-E
Camera	Image Sensor	1/3″ SONY Super HAD CCD	1/3″ SONY Super HAD II CCD	1/3" SONY EXview HAD CCD II
	Resolution	420TVL	540TVL	650TVL
	Effective Pixel	PAL:500×582;NTSC:510×492	PAL:752×582;NTSC:768×494	PAL:976×582 NTSC:976×494
	Electrical Shutter	PAL=1/50 -1/100,000s, NTSC=1/60 -1/100,000s
	Min. illumination	0.1 Lux	0.01 Lux	0.01 Lux
	IR distance	30m
	S/N Ratio	> 48dB (Auto Gain control closed)
	Gamma	0.45
	Lens	4-9mm fixed iris manual zoom lens(External adjustment for zoom and focus)
	Auto white balance	On/Off ( setup by IE client)
	Auto Gain control	On/Off ( setup by IE client)
	Backlight Compensation	On/Off ( setup by IE client)
	Video Output	1 channel, BNC (1.0Vp-p, 75Ω)
Image	Video Compression	H.264 Main Profile、MJPEG
	Signal System	NTSC/PAL
	Compression Resolution	QCIF/CIF/2CIF/4CIF(D1)
	Dual code stream	Support
	Stream Type	Audio & video mixed stream or video stream
	Video Frame Rate	PAL: 1 – 25fps; NTSC: 1 – 30fps
	Video Bit Ratio	30Kbps~16Mbps (Self-define)
	Image Parameter	Brightness, Chroma, Contrast, Saturation adjust
	Picture Delay	Less than 200 millisecond (LAN)
	OSD	Channel name, date, time, stream information, OSD position adjustable
Audio	Audio Compression	G.726, G.711, ADPCM
	Audio Input	1 Channel , RCA (Linear input, 4.7KΩ)
	Audio Output	1 Channel, RCA (Linear electrical level)
	Audio Compression Rate	8Kbps/32Kbps
Network	Network Interface	1, RJ45 10M/100M adaptive Network interface
	Mobile Monitor	Supports smart mobile phone
	RTSP Protocol	Support
Storage	Local Storage	1 Micro SD card interface, SD2.0 standard, Maximum storage 32G, support recording storage and snap
	FTP storage	Support FTP server remote recording and storage
Pan/Tilt	Pan/tilt Interface	1, RS485
	Pan/tilt Protocol	Multi-protocol, support preset setup and call
Alarm	Alarm Input	1 channel, NO/NC
	Alarm Output	1 channel, 120VAC 1A/24VDC 1A
	Alarm Processing	Email/SMS(auxiliary equipment needed)
Others	Material	Aluminum alloy
	Power input	DC 12V
	Power Consumption	<1A
	Dimension	Camera:119×135mm(Φ×H)
	Weight	1.4KG
	Operation Temperature	-10°C ~ +55°C
	Relative Humidity	10 ~ 85%

Connector

DC12V: Power input

LAN: Network interface

Audio in: Audio input

Audio out: Audio output

RESET: (Yellow) Reset button,restore all parameters to factory default value

GND: (Gray or Brown) Signal GND, Alarm input GND, RS485 GND

ALARM IN: (Red) Alarm input

ALARM OUT A: (Orange) Alarm output A

ALARM OUT B: (Purple) Alarm output B

RS485 +: (Green) RS485 +

RS485 -: (Blue) RS485 -